18
Smart card usage
2. Select a smart card from the table, then do one of the following:
Editing smart cards
Use the Edit Smart Card dialog box to edit smart card details.
1. From the Encryption Center dialog box, select Smart Card > Edit Smart Card from the menu
FIGURE 160
2. Insert the smart card into the card reader.
3. After the card's ID is displayed in the Card ID field, enter the Card Password, then click Login.
4. Edit the card assignment user information as needed.
5. Click OK.
438
•
Click Delete to remove the smart card from the Management application database.
Deleting smart cards from the Management application database keeps the Smart Cards
table at a manageable size, but does not invalidate the smart card. The smart card can
still be used. You must deregister a smart card to invalidate its use.
The Delete operation applies only to recovery cards.
•
Click Save As to save the entire list of smart cards to a file. The available formats are
comma-separated values (.csv) and HTML files (.html).
task bar.
The Edit Smart Card dialog box displays
Edit Smart Card dialog box
(Figure
160).
Brocade Network Advisor SAN User Manual
53-1002167-01