Adding An Invalid Words Threshold - Brocade Communications Systems Brocade 8/12c User Manual

22
Adding thresholds

Adding an Invalid Words threshold

NOTE
This threshold is only available for Fabric OS devices.
To add an Invalid Words threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Invalid Words (Fabric OS only) from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of invalid words allowed for the threshold in the Threshold errors field.
7.
8. Click OK to add the Invalid Words threshold to the table and close the Add Invalid Words
9. Click OK on the Port Fencing dialog box.
686
The Port Fencing dialog box displays.
The Add Invalid Words Threshold dialog box displays.
FIGURE 310
Add Invalid Words Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
Select the time period for the threshold from the errors per list. The following choices are
available:
•
None—the port is blocked as soon as the specified number of invalid words allowed is met.
•
Second—the port is blocked as soon as the specified number of invalid words allowed is
reached within a second.
•
Minute—the port is blocked as soon as the specified number of invalid words allowed is
reached within a minute.
•
Hour—the port is blocked as soon as the specified number of invalid words allowed is
reached within a hour.
•
Day—the port is blocked as soon as the specified number of invalid words allowed is
reached within a day.
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
step 8.
step 6.
Brocade Network Advisor IP User Manual
"Assigning thresholds" on
53-1002168-01