Deleting An Event Action Definition; Snort Message Forwarding - Brocade Communications Systems Brocade 8/12c User Manual

30
Event action definitions

Deleting an event action definition

Perform the following steps to delete an event action definition.
1. Select Monitor > Event Processing > Event Actions.
2. Select the definition that you want to delete from the Event Actions list.
3. Click Delete.
4. Click Yes to delete the definition, or No to cancel the request.

Snort message forwarding

Snort is a third-party tool that monitors network traffic in real time. When Snort detects dangerous
payloads or other abnormal behavior, it sends an alert to Syslog in real time. You can turn Snort
messages on or off using the Add Syslog Filter dialog box
By default, the Forward Snort© Messages feature is not enabled. You must enable it to have Snort
messages forwarded to the configured Syslog destinations.
To forward Snort messages, complete the following steps:
1. In the Add Syslog Filter dialog box, click the Forward Snort® Messages check box (see
2. From the Identification pane of the Add Event Action dialog box, click Next to advance to the
880
The Event Actions dialog box displays.
A message displays asking you to confirm the deletion request.
in "Adding a syslog filter"
Events pane. See "Creating an event action definition"
on event actions.
The Events pane of the Add Event Action dialog box displays, as shown in
Message is the default in the Show list.
FIGURE 392
Events pane of the Add Event Action dialog box
on page 866).
on page 867 for complete instructions
Figure
Brocade Network Advisor SAN User Manual
step 8
392. Snort®
53-1002167-01