Importing Hosts From A Fabric - Brocade Communications Systems Brocade 8/12c User Manual

4. Browse to the CSV file location.
5. Click Open.
6. Verify the imported values in the Host List .
7.
8. Click OK on the Add Host Adapters dialog box.
9. Click Close on the Discover Host Adapters dialog box.

Importing Hosts from a Fabric

To discover a Host from a discovered fabric, complete the following steps.
1. Select Discover > Host Adapters.
2. Click Add.
Brocade Network Advisor SAN User Manual
53-1002167-01
The CSV file must meet the following requirements:
•
Comma separated IP address or host names
•
No commas within the values
•
No escaping supported
For example, XX.XX.XXX.XXX, XX.XX.X.XXX, computername.company.com
The CSV file is imported to the Add Host Adapters dialog box. During import, duplicate values
are automatically dropped. When import is complete, the imported values display in the Host
List. If the file cannot be imported, an error displays.
Configure Host credentials, if necessary.
a. Enter the HCM Agent port number in the Port field.
b. Enter your username in the User ID field.
c. Enter your password Password field.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
The Discover Host Adapters dialog box displays.
The Add Host Adapters dialog box displays.
3
Host discovery
69