Members Tab - Brocade Communications Systems Brocade 8/12c User Manual

•
•
•

Members tab

The Members tab
access the Members tab, select a group from the Encryption Center Devices table, then select
Group > Properties from the menu task bar, or right-click a group and select Properties.
NOTE
You can also select a group from the Encryption Center Devices table, then click the Properties icon.
FIGURE 270
The Members tab lists group switches, their role, and their connection status with the group leader.
The tab displays the configured membership for the group (none of the table columns are editable).
The list can be different from the members displayed in the Encryption Center dialog box if some
configured members are unmanaged, missing, or in a different group.
Possible Connection Status values are as follows:
•
•
•
Brocade Network Advisor SAN User Manual
53-1002167-01
Backup Key Vault Connection Status - the status of the connection to the backup key vault, if a
backup is configured.
Primary key vault certificate - the details of the primary vault certificate; for example, version
and signature information.
Backup key vault certificate - the details of the backup vault certificate; for example, version
and signature information.
(Figure 270) is viewed from the Encryption Group Properties dialog box. To
Encryption Group Properties dialog box - Members tab
Group Leader - this switch is the group leader so there is no connection status.
Trying to Contact - the member is not responding to the group leader. This may occur if the
member switch is not reachable by way of the management port, or if the member switch does
not believe it is part of the encryption group.
Configuring - the member switch has responded and the group leader is exchanging
information. This is a transient condition that exists for a short time after a switch is added or
restored to a group.
Viewing and editing group properties
18
567