Deleting An Aor; Ldap Authorization; Loading An Active Directory Group - Brocade Communications Systems Brocade 8/12c User Manual

5

LDAP authorization

Deleting an AOR

To delete an AOR, complete the following steps.
1. Select Server > Users.
2. Select the AOR you want to delete in the AOR table and click Delete.
3. Click Yes on the confirmation message.
4. Click Close to close the Users dialog box.

LDAP authorization

NOTE
You must have User Management Read and Write privileges to map roles and AORs to Active
Directory groups.
Lightweight Directory Access Protocol (LDAP) authorization enables you to configure user access
rights to Active Directory groups (including users, contacts, computers, and other Active Directory
groups).

Loading an Active Directory group

To load an Active Directory group, complete the following steps.
1. Select Server > Users.
2. Click the LDAP Authorization tab.
3. Click Fetch.
4. Select the LDAP server network address from the Network Address list.
5. Enter the TCP port number in the TCP Port field.
6. Select the authentication protocol MD5 from the Authentication list.
7.
8. Enter your LDAP server user login password in the Password field.
9. Select the Security Enable check box to enable the security channel between the Management
154
The Users dialog box displays.
The Users dialog box displays.
The Fetch AD Group dialog box displays.
The default is 389.
Enter your LDAP server user login name in the User Name field.
application server and the LDAP server.
When you select the Security Enable check box, the TCP port number automatically changes to
port 636 and you must enable certificate services on the LDAP server.
Brocade Network Advisor SAN User Manual
53-1002167-01