Adding Vlan Properties - Brocade Communications Systems Brocade 8/12c User Manual

24
Port VLANs

Adding VLAN Properties

The Add VLAN dialog box has two tabs: VLAN View and Product View. The VLAN properties vary for
IOS and DCB products. When an IOS VLAN is selected, the Name, QoS, and Router Interface fields
display. When a DCB VLAN or product is selected and moved to the Products/VLAN list, the Name
and Admin Status fields and the FCoE check box display. All the fields displayed for DCB products
are read-only.
1. On the Add VLAN dialog box, click the Properties tab.
2. Click the VLAN View option to view the products to which the VLANs are to be deployed, or click
3. Select and expand a product entry to display the VLANs that are to be deployed to that product.
4. Select and expand a VLAN entry to display the products to which it will be deployed.
5. Enter the following information for IOS products:
732
The Add VLAN dialog box in VLAN View displays.
FIGURE 336
Add VLAN dialog box - VLAN Properties pane - Product View
the Product View option to display the VLANs that are to be deployed to that product.
•
Name—Displays the name of the VLAN (not editable).
•
QoS—Select a QoS level from the list.
Select Low (None or 0) through High (7) for NetIron CES products. Select None for

NetIron CER and NetIron CES products if the product does not have VLAN priority
configured (None applies only to NetIron CER and NetIron CES products).
Select Low (0) through High (7) for all other Brocade IP products.

•
Router Interface
Brocade Network Advisor SAN User Manual
53-1002167-01