Finding Frame Monitor Assignments; Removing A Frame Monitor From A Port - Brocade Communications Systems Brocade 8/12c User Manual

28

Finding frame monitor assignments

6. Click the right arrow button to move the frame monitor to the selected ports.
7.
8. Click Start.
9. Click Close after configuration is complete (indicated by "Completed" in the Progress column).
Finding frame monitor assignments
Using the following procedure, you can select a frame monitor on a switch and see the ports to
which it is assigned.
1. Select Monitor > Fabric Watch > Frame Monitor.
2. Select the Port option.
3. Select a switch in the Products / Ports list.
4. Select a frame monitor in the Monitors list.
5. Click the Find arrow.

Removing a frame monitor from a port

1. Select Monitor > Fabric Watch > Frame Monitor.
2. Select the Port option.
3. Expand the switch in the Products / Ports list.
4. Select the port from which you want to remove the frame monitor.
5. Select one or more frame monitors in the Monitor Details list.
6. Click Remove.
7.
820
The Monitor Details list displays the monitors that are assigned to a selected port. If no
monitors are assigned, or if more than one port is selected, the Monitor Details list does not
display.
Click OK.
The Frame Monitor Configuration Status dialog box displays.
The frame monitor configuration is applied to the ports.
The Frame Monitor dialog box displays.
The Monitors list displays all of the frame monitors defined for that switch.
The ports to which the frame monitor is assigned are highlighted.
The Frame Monitor dialog box displays.
The Monitors list displays all of the frame monitors defined for that switch.
The Monitor Details list displays all of the frame monitors assigned to that port.
Click OK.
The Frame Monitor Configuration Status dialog box displays.
Brocade Network Advisor IP User Manual
53-1002168-01