Editing A Security Threshold - Brocade Communications Systems Brocade 8/12c User Manual

6. Edit the number of state changes allowed for the threshold in the Threshold errors field, if
7.
8. Click OK to add the state change threshold to the table and close the Edit State Change
9. Click OK on the Port Fencing dialog box.

Editing a Security threshold

NOTE
This threshold is only available for M-EOS devices.
To edit a Security threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Security from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Change the name for the threshold in the Name field, if necessary.
Brocade Network Advisor IP User Manual
53-1002168-01
necessary.
Change the time period for the threshold from the errors per list, if necessary. The following
choices are available:
•
None—the port is blocked as soon as the specified number of invalid CRCs allowed is met.
•
Second—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a second.
•
Minute—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a minute.
•
Hour—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a hour.
•
Day—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a day.
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
The Port Fencing dialog box displays.
The Edit Security Threshold dialog box displays.
FIGURE 324
Edit Security Threshold dialog box
22
Adding thresholds
"Assigning thresholds" on
701