Deleting A Top Talker Monitor; Pausing A Top Talker Monitor; Restarting A Top Talker Monitor - Brocade Communications Systems Brocade 8/12c User Manual

9. Click Apply.
10. Click the minimize button to hide this dialog box when it is not needed.

Deleting a Top Talker monitor

To delete a Top Talker monitor, complete the following steps.
1. Select the dialog box of the Top Talker monitor you want to delete.
2. Click Close.
3. Click Yes on the 'do you want to delete this monitor' message.

Pausing a Top Talker monitor

To pause a Top Talker monitor, complete the following steps.
1. Select the dialog box of the Top Talker monitor you want to pause.
2. Click Pause.

Restarting a Top Talker monitor

To restart a Top Talker monitor, complete the following steps.
1. Select the dialog box of the Top Talker monitor you want to restart.
2. Click Continue.
Brocade Network Advisor SAN User Manual
53-1002167-01
The top 20 conversations display in the Current Top Talkers table. The Top Talkers Summary
table displays all Top Talkers that occurred since the Top Talkers dialog box was opened
(displays a maximum of 360). When the maximum is reached, the oldest Top Talker drops as a
new one occurs.
The F_port mode Top Talker provides the following details:
•
Rx Ave (MB/sec) or Tx Ave (MB/sec)
•
Occurrences
•
Source
•
Source Switch/Port
•
Destination
•
Destination Switch/Port
•
% Utilization
SAN Top Talker monitoring
•
Last Occurred
•
SID
•
Source Port
•
DID
•
Destination Port
•
Port Speed
27
799