Brocade Communications Systems Brocade 8/12c User Manual page 120

3
VM Manager Discovery
2. Click Add.
3. Enter the IP address or host name in the Network Address field.
4. Enter the VM manager port number in the Port field.
5. Enter the VM manager username in the User ID field.
6. Enter the VM manager password Password field.
7.
8. Select the Forward event to vCenter check box to enable event forwarding from the
9. Click OK on the Add VM Manager dialog box.
10. Click Close on the Discover VM Managers dialog box.
76
The Add VM Manager dialog box displays.
FIGURE 32
Add VM Manager dialog box
Select the Enable display of network information in vSphere client check box to enable
vSphere client plug-in registration.
Clear to disable vSphere client plug-in registration.
Management application to vCenter.
Clear to disable event forwarding.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A VM manager displays in Discovered VM Managers table with pending status. To update the
status from pending you must close and reopen the Discover VM Managers dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01