9. To set policy monitors for hosts, select the Host Checks tab and complete the following steps.
Brocade Network Advisor SAN User Manual
53-1002167-01
FIGURE 364
Add Policy Monitor dialog box, Hosts Checks tab
a. Select the Check for redundant connections to attached fabrics check box to determine if
there are at least the minimum number of configured physical connections between the
host and the attached fabric.
The default is 2.
b. Enter the minimum number of connections between the host and the attached fabric in
the Minimum Connections field.
The default recommended is 2.
c.
Select the hosts to which you want to apply this policy in the Available Hosts table and click
the right arrow button.
The selected hosts display in the Selected Hosts table.
Adding a policy monitor
29
831