Policy Monitor Scheduling - Brocade Communications Systems Brocade 8/12c User Manual

5. Clickthe closebutton (X) on the Policy_Name - Policy Monitor Report browser window.
6. Click Close on the Policy Monitor dialog box.

Policy monitor scheduling

You can schedule a policy monitor to run automatically.
Configuring a one-time policy monitor schedule
To configure a one-time schedule, complete the following steps.
1. Select One Time from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Click the Date list to select a date from the calendar.
4. Click OK on the Schedule Properties dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
SAN Switch Checks—Displays the switch name and switch IP address and Status of the
policy check for the following options:
SAN Switch - Check if the product is configured to send events to this server

SAN Switch - Check if the product is configured to send Upload Failure Data Capture to

an FTP server
SAN Switch - Check for at least Configured_Minimum_Value connections to

neighboring switches
•
Host Check—Displays the Host name and Status of the policy check for the following
option:
Host - Check for at least Configured_Minimum_Value connections to attached fabrics

•
Management Check—Displays the Status of the policy check for the following option:
Management - Check to see if the server backup is enabled and working

To export a report, refer to
Where the hour value is from 0 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to one of the following procedures:
•
To add policy monitor, refer to
•
To edit policy monitor, refer to
"Exporting SAN reports" on page 925.
step 7 of "Adding a policy monitor"
step 7 of "Editing a policy monitor"
Policy monitor scheduling
on page 828.
on page 833.
29
839