TABLE 17
Field/Component
State
Status
Switch Name
Switch IP
Switch WWN
Tape Pipelining
Tunnel ID
Type
Unit Type
Vendor
# Virtual FCoE port count
VLAN #
VLAN Class of Service for Control
Connection
VLAN Class of Service for Data
Connection
VLAN ID
WWN
2. To view port properties, select one of the following tabs:
3. If you selected the FC Ports tab, select the port type.
Brocade Network Advisor SAN User Manual
53-1002167-01
Device properties (Continued)
The following port types are available depending on the selected device:
•
FC Ports
•
GigE Ports
•
IP Ports
•
iSCSI Ports
•
Virtual Sessions Ports
•
Virtual FCoE Ports
•
Virtual Machine Ports
•
FC
•
ICL
•
GigE
For a description of the port properties, refer to
Description
The device's state, for example, online or offline.
The operational status.
The switch name.
The switch IP address.
The switch world wide name.
Whether tape pipelining is On or Off for the FCIP tunnel.
The tunnel identifier.
The device type.
The unit type of the node.
The product vendor.
The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
The VLAN number of the FCIP tunnel.
The VLAN class of service for the control connection of the FCIP tunnel.
The VLAN class of service for the data connection of the FCIP tunnel.
The VLAN identification number.
The world wide name of the device.
"Port properties"
10
Properties
on page 277.
267