Brocade Communications Systems Brocade 8/12c User Manual page 522

18
Creating a new encryption group
3. If you are implementing encryption on data replication LUNs used by the EMC Symmetrix
4. Click Next.
FIGURE 181
5. Enter the location of the file where you want to store the certificate information, or browse to
6. Click Next.
478
Remote Data Facility (SRDF), you must select Enabled for REPL Support.
The Specify Certificate Signing Request File Name dialog box displays
Specify Certificate Signing Request File Name dialog box
the desired location.
The certificate stored in this file is the switch's Switch certificate signing file. You will need to
know this path and file name to install the switch's Switch certificate signing file on the key
management appliance.
The Specify Master Key File Name dialog box displays
(Figure 181).
(Figure 182).
Brocade Network Advisor SAN User Manual
53-1002167-01