Brocade Communications Systems Brocade 8/12c User Manual page 284

9
SMI Agent configuration
Configuring the SMI Agent port number
To configure the SMI Agent port number, complete the following steps.
1. Click the CIMOM tab.
2. Select or clear the Enable SSL check box, to enable or disable SSL for the SMI Agent.
3. Enter the SMI Agent port number in the SMI Agent Port # field.
240
FIGURE 88
CIMOM tab
NOTE
Disabling SSL will disable Indication and Client Mutual Authentication.
If the check box is checked (default), SSL is enabled. If the check box is clear, SSL is disabled.
This port number must be within the range of 1 through 65535. Defaults are 5989 with SSL
enabled and 5988 with SSL disabled.
Brocade Network Advisor SAN User Manual
53-1002167-01