Accepting Changes For All Fabrics; Accepting Changes For A Switch, Access Gateway, Or Phantom Domain - Brocade Communications Systems Brocade 8/12c User Manual

4
Fabric tracking
2. Click Yes to accept changes.

Accepting changes for all fabrics

1. Accept the changes to all fabrics by choosing one of the following options:
2. Click Yes to accept changes.

Accepting changes for a switch, access gateway, or phantom domain

1. Accept the changes to a switch, access gateway, or phantom domain by choosing one of the
132
•
Device Ports—This table shows a brief summary of the device ports including status
(whether the device port will be added (
type, port, port WWN, node WWN, and attached port number.
•
Connections—This table shows a brief summary of the switch connections including the
status (whether the device port will be added (
connection type as well as the WWN, domain ID, IP address, and port number of the
connected switches.
•
Click in the white space on the Connectivity Map and select Monitor > Accept All Changes.
•
Right-click in the white space on the Connectivity Map and select Accept All Changes.
A message displays listing the following information:
•
Do not show me this again check box--Select if you do not want to see this dialog box again
when you enable or disable fabric tracking or accept changes for a switch or fabric.
•
Switches—This table shows a brief summary of the switches including status (whether the
device port will be added (
address, WWN, and domain ID.
•
Device Ports—This table shows a brief summary of the device ports including status
(whether the device port will be added (
type, port, fabric name, port WWN, node WWN, and attached port number.
•
Connections—This table shows a brief summary of the switch connections including the
status (whether the device port will be added (
connection type as well as the fabric name, WWN, domain ID, IP address, and port number
of the connected switches.
following options:
•
Select the switch, access gateway, or phantom domain on the Product List or Connectivity
Map and select Monitor > Accept Changes.
•
Right-click the switch, access gateway, or phantom domain on the Product List or
Connectivity Map and select Accept Change.
The Accept Changes Summary dialog box displays. This dialog box includes the following
information:
•
Do not show me this again check box--Select if you do not want to see this dialog box again
when you enable or disable fabric tracking or accept changes for a switch or fabric.
•
Fabric Name—Displays the name of the selected fabric.
•
Switches—This table shows a brief summary of the switches including status (whether the
device port will be added (
and domain ID.
) or removed (
) or removed (
) or removed ( ) from the fabric), name, fabric name, IP
) or removed (
) or removed (
) or removed ( ) from the fabric), name, IP address, WWN,
Brocade Network Advisor SAN User Manual
) from the fabric), device
) from the fabric) and
) from the fabric), device
) from the fabric) and
53-1002167-01