Adding A State Change Threshold - Brocade Communications Systems Brocade 8/12c User Manual

22
Adding thresholds
7.
8. Click OK on the Port Fencing dialog box.

Adding a State Change threshold

NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
To add an State Change threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
690
c. Select the time period for the threshold from the errors per list. The following choices are
available:
•
None—the port is blocked as soon as the specified number of protocol errors allowed
is met.
•
Second—the port is blocked as soon as the specified number of protocol errors
allowed is reached within a second.
•
Minute—the port is blocked as soon as the specified number of protocol errors allowed
is reached within a minute.
•
Hour—the port is blocked as soon as the specified number of protocol errors allowed is
reached within a hour.
•
Day—the port is blocked as soon as the specified number of protocol errors allowed is
reached within a day.
Click OK to add the protocol errors threshold to the table and close the Add Protocol Error
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
The Port Fencing dialog box displays
FIGURE 314
Port Fencing dialog box
(Figure 307).
Brocade Network Advisor IP User Manual
"Assigning thresholds" on
53-1002168-01