Editing The Brocade North America Call Home Center - Brocade Communications Systems Brocade 8/12c User Manual

Editing the Brocade North America call home center

Modem call home centers are only available for Brocade. To edit this call home center, complete
the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select Brocade North America in the Call Home Centers table.
3. Click Edit Centers (beneath the Call Home Centers table).
FIGURE 58
4. Make sure the call home center type you selected displays in the Call Home Centers list.
5. Select Enable to enable this call home center.
6. Enter the phone number or extension of the call home center in the Call Home Center - Phone
7.
8. Click Send Test to test the phone number.
9. Click OK.
10. Click OK to close the Call Home dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Call Home dialog box displays.
The Configure Call Home Center dialog box
Configure Call Home Center dialog box (Brocade North America option)
Number field
Enter the phone number or extension of the local server in the Local Server - Phone Number
field.
The selected call home center must be enabled to test the phone number.
A faked event is generated and sent to the selected call home center. You must contact the call
home center to verify that the event was received and in the correct format.
The Call Home dialog box displays with the call home center you edited highlighted in the Call
Home Centers table.
Editing a call home center
displays(Figure 58).
6
163