Product Communication - Brocade Communications Systems Brocade 8/12c User Manual

4
Software Configuration
5. Click Apply or OK to save your work.
6. Click OK on the "changes take effect after application restart" message.

Product communication

You can configure connections between the switch and the Management application server.
Configuring SAN communication
To configure SAN communication, complete the following steps.
1. Select Server > Options.
2. Select Product Communication from the Software Configurations list in the Category pane.
FIGURE 51
122
NOTE
Changes to this option take effect after an application restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 11.X.X > Server Management Console).
The Options dialog box displays.
Options dialog box (Product Communication option)
Brocade Network Advisor SAN User Manual
53-1002167-01