San Connection Utilization - Brocade Communications Systems Brocade 8/12c User Manual

27

SAN Connection utilization

4. Click Yes on the confirmation message.
5. Click OK on the Set Threshold Policies dialog box.
6. Make the threshold changes by selecting one of the following options:
7.
SAN Connection utilization
NOTE
Connection utilization is only supported on the following managed objects: E_ports, F_ports,
N_ports, 10 GE_ports and FCIP tunnels.
Performance connection utilization for device ports provides the following features:
•
•
•
•
FIGURE 357
812
The Confirm Threshold Changes dialog box displays.
•
To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
•
To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
Click OK on the Confirm Threshold Changes dialog box.
Turns the utilization display on and off from the menu and tool bar.
Displays moving dotted colored lines that originate from a port.
Displays two lines in the topology (when turned on); one represents percentage utilization for
transmit and the other percentage utilization for receive. The movement of the line determines
if it is a transmit or a receive.
-
Receive (Rx)—line moves into a port.
-
Transmit (Tx)—line moves out of a port.
Displays different colors to represent the percentage utilization range.
Utilization Legend
Brocade Network Advisor SAN User Manual
53-1002167-01