Adding thresholds
The Management application allows you to create Invalid CRCs, Invalid words, Link, Link Reset,
Protocol Error, Security, and Sync Loss thresholds.
Adding a C3 Discard Frames threshold
NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
To add an C3 Discard Frames threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select C3 Discard Frames (Fabric OS only) from the Violation Type list.
3. Click Add.
Brocade Network Advisor IP User Manual
53-1002168-01
The Port Fencing dialog box displays
FIGURE 307
Port Fencing dialog box
The Add C3 Discard Frames Threshold dialog box displays.
FIGURE 308
Add C3 Discard Frames Threshold dialog box
(Figure
307).
22
Adding thresholds
683