Frame Monitor; In This Chapter - Brocade Communications Systems Brocade 8/12c User Manual

Brocade network advisor san user manual v11.1x (53-1002167-01, may 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

Frame Monitor

In this chapter

Frame Monitor
NOTE
Frame Monitoring is supported in Professional Plus and Enterprise Editions only. It is not supported
in the Professional Edition.
Frame monitors count the number of frames transmitted through a port that match specific values
in the first 64 bytes of the frame. Since the entire Fibre Channel frame header and many upper
protocol (for example, SCSI) headers fall within the first 64 bytes of a frame, frame monitors can
detect different types of traffic transmitted through a port. Each frame monitor keeps a timestamp
of its last refresh. It also keeps a generation count, which is incremented each time the monitor is
cleared.
Frame monitors generate alerts whenever the frame count for a certain frame type crosses the
threshold configured for that frame type. You can configure high thresholds for every frame type,
specify actions to be taken when the threshold is exceeded, and configure how often the data are
sampled.
Virtual Fabrics considerations: You can assign frame monitors to ports in a logical switch. If a port
is moved from one logical switch to another, however, all monitors that were assigned to the port
are cleared in the new logical switch.
Trunking considerations: For trunked ports, the frame monitor is configured on the trunk master.
Brocade Network Advisor IP User Manual
53-1002168-01
Frame Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 815
Creating a custom frame monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 817
Editing a frame monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 819
Assigning a frame monitor to a port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 819
Finding frame monitor assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820
Removing a frame monitor from a port . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820
Removing a frame monitor from a switch . . . . . . . . . . . . . . . . . . . . . . . . . . 821
Chapter
28
815

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 11.1.xBrocade bladesystem 4/24

Table of Contents