Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 317

Link Aggregation Commands
-> show linkagg agg 1-5 port
Slot/Port Aggregate
---------+-----------+--------+--------------+------+----+----+----+-----
1/16 Static
1/17 Static
3/1 Static
3/2 Static
3/3 Static
Output fields are defined here:
output definitions
Slot/Port
Aggregate
SNMP Id
Status
Agg
Oper
Link
Prim
A port that belongs to a static aggregate is specified:
-> show linkagg port 4/1
Static Aggregable Port
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Port position in the aggregate: 0,
Primary port
Output fields are defined here:
output definitions
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
OmniSwitch CLI Reference Guide
SNMP Id Status
2016 CONFIGURED
2017 CONFIGURED
3001 CONFIGURED
3045 CONFIGURED
3069 CONFIGURED
The slot/port associated with the aggregate group.
The type of aggregate group associated with the port, either Static or
Dynamic.
The SNMP ID associated with the aggregate group.
The current status of the port, which can be
CONFIGURED, PENDING, SELECTED, or RESERVED.
The number of the aggregate groups associated with this port.
The operational status of the port.
The physical link status of the port.
Specifies if the port is the primary port of the aggregate. The primary
port is the lowest numbered port in a link aggregate.
: 4001,
: 4/1,
: ENABLED,
: DOWN,
: CONFIGURED,
: DOWN,
: 2,
: NONE
The SNMP ID associated with this port.
The slot and port number.
The current administrative state of this port, which can be ENABLED
or DISABLED.
The current operational state of the port, which can be UP or DOWN.
The current operational state of the port, which can be
CONFIGURED, PENDING, SELECTED, or RESERVED.
March 2011
Agg Oper Link Prim
1 UP UP YES
2 UP UP NO
3 UP UP NO
4 UP UP NO
5 UP UP NO
show linkagg port
page 6-59