Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 320

show linkagg port
output definitions (continued)
Partner Oper System Id
Partner Admin Key
Partner Oper Key
Attached Agg ID
Actor Port
Actor Port Priority
Partner Admin Port
Partner Oper Port
Partner Admin Port Priority
Partner Oper Port Priority
Actor Admin State
Actor Oper State
Partner Admin State
Partner Oper State
Release History
Release 7.1.1; command introduced.
page 6-62
The MAC address that corresponds to the system ID of the remote
partner.
The administrative value of the key for the remote partner. This value is
used along with Partner Admin System Priority, Partner Admin System,
Partner Admin Port, and Partner Admin Port Priority to manually con-
figure aggregation. You can modify this parameter with the
lacp port partner admin-key
The current operational value of the key for the protocol partner.
The ID of the aggregate group that the port has attached itself to. A
value of zero indicates that the port is not attached to an aggregate
group.
The port number locally assigned to this port.
The actor priority value assigned to the port. You can modify this
parameter with the linkagg lacp port actor port priority
(see page 6-45).
The administrative value of the port number for the protocol partner.
This value is used along with Partner Admin System Priority, Partner
Admin System ID, Partner Admin Key, and Partner Admin Port Prior-
ity to manually configure aggregation. You can modify this parameter
with the linkagg lacp port partner admin-port
6-47).
The operational port number assigned to the port by the protocol
partner of the port.
The administrative port priority of the protocol partner. This value is
used along with Partner Admin System Priority, Partner Admin System
ID, and Partner Admin Key to manually configure aggregation.
You can modify this parameter with the
admin port-priority command (see
The priority value assigned to the this port by the partner.
The administrative state of the port. You can modify this parameter
with the linkagg lacp port actor admin-state
6-31).
The current operational state of the port.
The administrative state of the partner port. You can modify this
parameter with the linkagg lacp agg partner admin-state
(see page 6-37).
The current operational state of the partner port.
Link Aggregation Commands
command (see page
command (see
linkagg lacp port partner
page 6-49).
command (see
OmniSwitch CLI Reference Guide
linkagg
6-41).
command
page
page
command
March 2011