G
Zoning troubleshooting
Problem
Zoning activation message displays for a long
time, but zone configuration is not activated.
Out of memory error caused by running a
zoning report for a large zone configuration
(1 MB) in a medium-sized SAN due to a third
party tool.
1156
Resolution
Telnet zoning can take a long time. To improve speed, open the Discover Setup dialog box
(Discover > Setup) and add the IP address for the device to the Selected Individual
Addresses list.
You must increase the client memory allocation by completing
allocation settings"
on page 118.
"Configuring memory
Brocade Network Advisor SAN User Manual
53-1002696-01