Brocade Communications Systems StoreFabric SN6500B User Manual page 1177

TABLE 98
Field
Protocol
Reason
Remote Switch Name
Remote Switch IP
Remote Switch WWN
Remote Slot #
Remote Master Port
Remote Member Ports
Sequence number
Serial #
Slot #
Source IP Address
Speed (Gb/s)
State
Status
Switch Name
Switch IP
Switch WWN
Symbolic Name
Tag
Tape Pipelining
Troubleshooting list
Tunnel Count
Tunnel ID
Type
Unit Type
User Port #
Vendor
# Virtual FCoE port count
# Virtual Session Ports
VLAN #
Brocade Network Advisor SAN User Manual
53-1002696-01
Port properties (Continued)
Description
The network protocol, for example, Fibre Channel.
The device status.
The remote switch name of the trunk.
The remote switch IP address of the trunk.
The remote switch world wide name of the trunk.
The remote slot number of the trunk.
The remote master port of the trunk.
The remote member port of the trunk.
The sequence number of the switch.
The hardware serial number.
The location (slot) of the port.
The IP address of the of the FCIP tunnel source device.
The port speed, in Gbits per second.
The port state (online or offline).
The port's operational status (online or offline).
The switch name.
The switch IP address.
The switch world wide name.
The symbolic name of the port.
The tag number of the port.
Whether tape pipelining is On or Off for the FCIP tunnel.
Select to launch the dialog box of one of the following troubleshooting
options:
•
•
•
The number of tunnels.
The tunnel identifier.
The type of port, for example, U_port.
The unit type of the node.
The number of the user port.
The product vendor.
The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
The number of virtual session ports associated with the GE port.
The VLAN number of the FCIP tunnel.
SAN device properties
IP Ping
IP Traceroute
IP Performance
E
1129