FIGURE 343
12. Review the post-configuration instructions, which you can copy to a clipboard or print for later.
13. Click Finish to exit the Configure Switch Encryption wizard.
14. Refer to
Configuring key vault settings for IBM Tivoli Key Lifetime Manager
(TKLM)
The following procedure assumes you have already configured the initial steps in the Configure
Switch Encryption wizard. If you have not already done so, go to
on page 764.
Figure 344
Brocade Network Advisor SAN User Manual
53-1003154-01
Next Steps dialog box
"Understanding configuration status results"
shows the key vault selection dialog box for TKLM.
Creating a new encryption group
on page 800.
"Creating a new encryption group"
20
789