Part Code 9610 - HP StorageWorks P9000 - Disk Arrays Manual

Part code 9610

Table 86 Error codes (part code 9610)
Part Error
Code Number
9610 7060
9610 7442
9610 81 12
9610 9107
9610 9362
9610 9363
292 Message (part code group 9nnn)
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
There is an invalid value in the Data
Retention information.
There is no valid volume.
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Do you want to change the expiration
lock mode?
The specified retention term exceeds the
maximum.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Mount volumes, then retry the operation.
To continue processing, click [OK]. To
stop processing, click [Cancel].
To change the mode, click [OK].
Otherwise, click [Cancel].
Correct the retention term, then retry the
operation.
Severity
Level
E
W
W
W
i
W