Part Code 20123 - HP StorageWorks P9000 - Disk Arrays Manual

Table 92 Error codes (part code 20122) (continued)
Part Error
Code Number
20122 107019
20122 108029
20122 108030
20122 108031
20122 108032
20122 108033
20122 109001
20122 109002
20122 109003
20122 109015

Part code 20123

Table 93 Error codes (part code 20123)
Part Error
Code Number
20123 107000
20123 107001
20123 107002
20123 107003
304 Message (part code group 20nnn)
Error Message
An internal logic error occurred.
Remote Web Console cannot be used
because there is no license of Remote
Web Console.
There is a license that {0} day(s) remain
to end.
There is a license that {0} day(s) remain
to end, or a license whose capacity is
insufficient.
Remote Web Console cannot be used
because there is no reference authority
of Remote Web Console.
A time-out error occurred.
The processing is terminated normally.
The processing is not executed.
The number of tasks with auto delete
disabled has reached the maximum.
Therefore, the execution of the tasks are
inhibited at present.
The task could not complete execution.
because the Remote Web Console
stopped.
Error Message
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
Recommended Action
Please contact HP Technical Support.
Check the state of installed licenses on
the license window.
To use Remote Web Console, set the
license of Remote Web Console to the
installed state.
Check the expiration date of the program
product on the license key window.
Purchase a new license if you want to
continue to use the program product.
Check the expiration date or the license
capacity of the program products on the
license key window. Purchase new
licenses if you want to continue to use
those program products.
To use Remote Web Console, login
again with the user who has the
reference authority of Remote Web
Console.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Click [OK], then continue the operation.
Click [OK], then continue the operation.
Open the task window, then set the auto
delete to disable for tasks in the
following status, which can be deleted
without any problem.
Complete status
Failed status
Check whether the setting has been
enabled, then make the setting again.
Recommended Action
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
Severity
Level
E
W
W
W
W
E
i
W
W
W
Severity
Level
E
E
E
E