HP StorageWorks P9000 - Disk Arrays Manual page 235

Table 59 Error codes (part code 7005) (continued)
Part Error Error Message
Code Number
7005 58585 The operation failed because the CU
group of the specified volume is not
supported.
7005 58630 The operation failed because the
specified P-VOL was used by Delta
resync of Continuous Access Journal.
7005 58631 The operation failed because the
specified S-VOL was used by Delta
resync of Continuous Access Journal.
7005 58632 The reserve volume setting failed
because the specified volume was used
by Delta resync of Continuous Access
Journal.
7005 5871 1 The operation failed because the
specified MU number was already used.
Specify other MU numbers.
7005 68000 A pair cannot be created because the
volume specified as P-VOL is not a Thin
Provisioning (V-VOL) volume but the
volume specified as S-VOL is a V-VOL.
7005 68001 Quick Restore cannot be executed
because the pair contains Thin
Provisioning volume (V-VOL).
7005 68021 "0" cannot be specified as the MU
number of L2 pair. Specify other MU
numbers.
7005 68737 The command has been rejected,
because the specified P-VOL is a Thin
Provisioning volume not associated with
a pool.
7005 68738 The command has been rejected,
because the specified S-VOL is a Thin
Provisioning volume not associated with
a pool.
7005 68739 The command has been rejected,
because the specified reserved volume
is a Thin Provisioning volume not
associated with a pool.
7005 68743 The command has been rejected,
because Quick Format is performed on
the specified P-VOL.
7005 68744 The command has been rejected,
because Quick Format is performed on
the specified S-VOL.
Recommended Action
Volumes that do not belong to CU group
0 are currently not supported. Specify
another volume.
The command cannot be executed in the
current status of Continuous Access
Journal pair.
See the section about sharing Business
Copy volumes in the Business Copy User
Guide for the relationship between the
state of the Continuous Access
Synchronous pair and the Business Copy
operations.
The P-VOL of Continuous Access Journal
pair for Delta resync cannot be specified
as S-VOL. Specify another volume.
The P-VOL of Continuous Access Journal
pair for Delta resync cannot be specified
as a reserved volume.
Specify another volume.
Refresh the Business Copy window, and
check the MU number that can be used.
Specify Thin Provisioning volume (V-VOL)
to P-VOL, when you specify V-VOL to
S-VOL.
Use Reverse Resync.
Specify other MU numbers.
Associate the Thin Provisioning volume
with a pool, then retry the operation.
Associate the Thin Provisioning volume
with a pool, then retry the operation.
Associate the Thin Provisioning volume
with a pool, then retry the operation.
Retry the operation after the Quick
Format has completed.
Retry the operation after the Quick
Format has completed.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 7005 235