HP StorageWorks P9000 - Disk Arrays Manual page 233

Table 59 Error codes (part code 7005) (continued)
Part Error Error Message
Code Number
7005 58299 The operation failed because the
specified P-VOL was a data volume of
Continuous Access Journal. Check the
requirements for using the volume with
Continuous Access Journal.
7005 58300 The operation failed, because the
specified S-VOL was a data volume of
Continuous Access Journal.
7005 58301 The reserve volume setting failed
because the specified volume was a data
volume of Continuous Access Journal.
7005 58351 The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Continuous Access Journal
pair.
7005 58356 The command has been rejected,
because the specified volume was used
by Continuous Access Journal and
Continuous Access Synchronous.
7005 58451 The disk subsystem is in internal process.
Please retry the operation.
7005 58476 The operation cannot be performed,
because the specified P-VOL is a P-VOL
for Snapshot.
7005 58477 The operation cannot be performed,
because the specified P-VOL is a V-VOL
for Snapshot.
7005 58478 The operation cannot be performed,
because the specified P-VOL is a pool
volume.
7005 58479 The operation cannot be performed,
because the specified S-VOL is a P-VOL
for Snapshot.
7005 58480 The operation cannot be performed,
because the specified S-VOL is a V-VOL
for Snapshot.
7005 58481 The operation cannot be performed,
because the specified S-VOL is a pool
volume.
7005 58482 The operation cannot be performed,
because the specified reserved volume
is a P-VOL for Snapshot.
7005 58483 The operation cannot be performed,
because the specified reserved volume
is a V-VOL for Snapshot.
7005 58484 The operation cannot be performed,
because the specified reserved volume
is a pool volume.
7005 58492 The Pairsplit-S operation has failed.
Check the configuration.
Recommended Action
Check the requirements for using the
volume with Continuous Access Journal.
Release the Continuous Access Journal
setting or specify another volume.
Release the Continuous Access Journal
setting or specify another volume.
Delete the Continuous Access Journal
pair or execute the operation by other
pairs.
Release the pair of Continuous Access
Journal or pair of Continuous Access
Synchronous, then retry the operation.
If the problem persists despite retrying,
please contact HP Technical Support.
Release the Snapshot pair, or select
another volume.
Specify another volume.
Release the pool volume or select
another volume.
Release the Snapshot pair or select
another volume.
Specify another volume.
Release the pool volume or select
another volume.
Release the Snapshot pair, or select
another volume.
Specify another volume.
Release the pool volume, or select
another volume.
Refresh the window, and check whether
the pair exists.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 7005 233