HP StorageWorks P9000 - Disk Arrays Manual page 224

Table 59 Error codes (part code 7005) (continued)
Part Error
Code Number
7005 8517
7005 8518
7005 8519
7005 8520
7005 8521
7005 8522
7005 8523
7005 8524
7005 8525
7005 8526
7005 8527
7005 8528
7005 8529
7005 8530
7005 8531
7005 8532
7005 8533
7005 8535
7005 8536
7005 8537
224 Message (part code group 7nnn)
Error Message
The number of S-VOL cylinders exceeds
the maximum.
You cannot create a pair, because the
track format is different for each. Make
sure that the specified emulation type is
the same for both.
Volumes specified as P-VOL and S-VOL,
or those constituting LUSE are not
consistent in capacity.
You cannot set a pair, because the
volume type is different for each.
The number of multiple copy jobs
exceeded the maximum.
The emulation type of the P-VOL is not
supported.
The emulation type of the S-VOL is not
supported.
The emulation type is not supported.
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
The command has been rejected,
because the P-VOL or the S-VOL is being
used by the host.
The command has been rejected,
because the emulation type of the
specified volume is not supported or the
specified S-VOL is used as a data volume
of Continuous Access Journal.
A processor failure was detected.
A cache failure was detected.
The cache capacities do not match.
Recommended Action
Check the contents, and retry.
Check the emulation type.
Select volumes with the same capacity.
When specifying LUSE volumes as P-VOL
and S-VOL, the capacity of each volume
constituting the LUSE volumes must be
the same.
Specify the volume of the same emulation
type, and retry the operation.
Check the contents, and retry.
Specify the emulation type supported in
HOMRCF.
Specify the emulation type supported in
HOMRCF.
Specify the emulation type supported in
HOMRCF.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Stop the usage by the host.
Specify a volume of the supported
emulation type. When the S-VOL is used
as a data volume of Continuous Access
Journal, the command cannot be
executed in the current status of
Continuous Access Journal pair.
See the section "Sharing Business Copy
volumes" in the HP StorageWorks P9000
Business Copy User Guide for the
relation between the status of Continuous
Access Journal pair and the Business
Copy operations.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
E
E
E
E
E
E
E
W
W
E
E
E