Part Code 20322; Part Code 20422 - HP StorageWorks P9000 - Disk Arrays Manual

Table 94 Error codes (part code 20222) (continued)
Part Error
Code Number
20222 109008
20222 109009
20222 109010
20222 109017
20222 109021

Part code 20322

Table 95 Error codes (part code 20322)
Part Error
Code Number
20322 107001

Part code 20422

Table 96 Error codes (part code 20422)
Part Error
Code Number
20422 105241
20422 105242
20422 105243
20422 105244
20422 105247
20422 106076
20422 106077
20422 106080
308 Message (part code group 20nnn)
Error Message
An error occurred during {0}. Check the
error details with the error code from the
following list.
{0} is aborted.
{0} is suspended.
{0} is completed(Request).
Check the error details with the error
code from the following list.
Error Message
The processing cannot continue due to
an internal logic contradiction.
Error Message
The specified pool is not for Smart Tiers.
The specified V-VOL is not for Smart
Tiers.
There is no pool information.
There is no V-VOL information.
There is no pool or V-VOL information.
The specified monitoring period cannot
be set.
Four or more types of drives cannot be
added to the specified pool.
A volume of different RAID level cannot
be specified in the same Tier.
Recommended Action
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
-
-
Recommended Action
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Recommended Action
Check the status of the pool.
Check the status of the V-VOL.
Check the status of the pool.
Check the status of the V-VOL.
Check the status of the pool or the
V-VOL.
Set the interval between the start and
finish time to more than one hour, then
retry the operation.
Check the support configuration of pools,
then retry the operation.
Check the support configuration of pools,
then retry the operation.
Severity
Level
E
i
i
i
W
Severity
Level
E
Severity
Level
W
W
W
W
W
W
W
W