Part Code 03121; Part Code 03122 - HP StorageWorks P9000 - Disk Arrays Manual

Table 33 Error codes (part code 03022) (continued)
Part Error
Code Number
03022 105274
03022 105275
03022 105279
03022 105280
03022 105281
03022 105283
03022 105283

Part code 03121

Table 34 Error codes (part code 03121)
Part Error
Code Number
03121 109205

Part code 03122

Table 35 Error codes (part code 03122)
Part Error
Code Number
03122 105264
03122 106005
03122 106006
03122 106007
03122 106008
03122 106009
Error Message
The interruption processing was
completed.
The current setting exceeds the maximum
number of quick formatting that can be
executed.
This functionality is not available. Virtual
LVI is required.
This functionality is not available. Open
Volume Management is required.
There is no LDEV that can be formatted.
This functionality is not available. Open
Volume Management is required.
The pool or the pool volume that is
associated with the target LDEV is
blocked.
Error Message
Are you sure you want to initialize all
the THP pools?
Error Message
The password is invalid.
No more pools can be registered,
because the number of registered pools
has reached the maximum.
The volume that can be set as a pool
volume does not exist.
The setting cannot be performed,
because the number of pools exceeds
the maximum.
The volume to be set as a pool volume
is not selected.
The setting cannot be performed,
because the number of pool volumes that
can be set to a pool exceeds the
maximum.
Recommended Action
The task status is changed. Close the
window, then check the task status.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Recommended Action
To continue the processing, click [OK].
Otherwise, click [Cancel].
Recommended Action
Check the password, then retry the
operation.
Check the support configuration of pools,
then retry the operation.
Check if there is a volume that can be
set as a pool volume, then retry the
operation.
Check the support configuration of pools,
then retry the operation.
Specify the volume, then retry the
operation.
Reduce the number of selected pool
volumes, then retry the operation.
Severity
Level
i
i
W
W
E
W
W
Severity
Level
W
Severity
Level
W
W
W
W
W
W
Part code 03121 93