HP StorageWorks P9000 - Disk Arrays Manual page 126

Table 46 Error codes (part code 5205) (continued)
Part Error
Code Number
5205 55599
5205 55600
5205 55646
5205 56301
5205 56302
5205 56303
5205 56524
5205 57101
5205 57102
5205 58451
5205 58572
5205 58573
5205 58574
5205 58575
5205 58576
5205 65434
5205 65673
126 Message (part code group 5nnn)
Error Message
The volume specified as a migration
target is used as a volume of Delta
resync for Continuous Access Journal or
Continuous Access Journal Z.
The specified volume is used as a volume
of Delta resync for Continuous Access
Journal or Continuous Access Journal Z.
Migration between external volumes with
different cache modes is invalid.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
This function cannot be used by the
storage partition administrator.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The disk subsystem is in internal process.
Please retry the operation.
An error occurred on the DKC side.
This function is not supported.
An error occurred while connecting to
the subsystem.
An error occurred while connecting to
the subsystem.
A communication time-out error occurred
in the disk subsystem.
The specified volume(s) are the leaf
volume(s) of Business Copy.
The specified volume(s) are already
being used as of Thin Provisioning
volume (V-VOL) (s).
Recommended Action
The volume of Delta resync cannot be
specified as a migration target.
See "Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide.
The volume of Delta resync cannot be
specified as a reserved volume.
See "Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide.
Specify the volumes with the same cache
mode.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check if the DKCMAIN microcode and
SVP microcode versions are mismatched.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Specify another volume.
Check the setting of the specified volume.
Severity
Level
W
W
W
E
E
E
E
E
E
W
E
E
E
E
E
W
W