Part Code 0605 - HP StorageWorks P9000 - Disk Arrays Manual

Part code 0605

Table 21 Error codes (part code 0605)
Part Error
Code Number
0605 201 1
0605 2015
0605 2087
0605 2095
0605 2200
0605 2201
0605 2202
0605 2203
0605 2205
0605 2515
0605 2516
0605 2517
Error Message
The status of the storage system requires
the maintenance (for example, the
storage system is blocked, the shared
memory is inconsistent, or some other
factor).
An error occurred while connecting with
the storage system.
The storage system is online to the
mainframe host.
Another maintenance processing or
failure handling is in progress.
The Concurrent Copy or the Compatible
XRC operation is in progress in the target
volumes.
Processing cannot be performed because
of Data Retention settings.
Processing cannot be performed because
of Volume Retention settings.
Processing cannot be performed because
of Volume Security for Mainframe
settings.
Journal volumes are included in the
external volumes to be maintained.
A pair of Continuous Access
Synchronous, Continuous Access
Synchronous Z, Continuous Access
Journal, or Continuous Access Journal Z
is defined.
Or, command devices defined by
Business Continuity Manager are
included.
A pair of Continuous Access
Synchronous, Continuous Access
Synchronous Z, Continuous Access
Journal, or Continuous Access Journal Z
is defined.
A pair of Business Copy, Business Copy
Z, Compatible FlashCopy, or Snapshot
is defined.
Recommended Action
Check the status of the storage system (if
the storage system is blocked, shared
memory is inconsistent, or some other
factor). If this problem persists, please
contact HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Take the storage system offline from the
connected host.
Wait for a while, then retry the
operation.
Cancel the Concurrent Copy job or
delete a Compatible XRC pair via the
host. If the Concurrent Copy or the
Compatible XRC operation is not in
progress in the target volumes, issue the
LISTSESS and LISTDVCS commands,
check the SESSION ID No., and
terminate SESSION by means of the
TERMSESS command.
Release the setting of Data Retention,
then retry the operation.
Release the setting of Volume Retention,
then retry the operation.
Release the setting of Volume Security
for Mainframe, then retry the operation.
Delete all the pairs that are using the
journal volumes to be maintained.
Release the pair definition or delete
command devices defined by Business
Continuity Manager, then retry the
operation.
Delete the pair definition or suspend the
pair, then retry the operation.
Release the pair definition, then retry the
operation. When quick split is in
progress, suspend the pair, then release
it.
Severity
Level
E
E
W
W
W
W
W
W
W
W
W
W
Part code 0605 41