HP StorageWorks P9000 - Disk Arrays Manual page 243

Table 62 Error codes (part code 7105) (continued)
Part Error Error Message
Code Number
7105 8529 An internal logic error occurred.
7105 8530 An internal logic error occurred.
7105 8531 An internal logic error occurred.
7105 8532 The command has been rejected,
because the S-VOL or the T-VOL is being
used by the host.
7105 8533 The command has been rejected,
because the emulation type of the
specified volume is not supported or the
specified T-VOL is used as a data volume
of Continuous Access Journal Z.
7105 8535 A processor failure was detected.
7105 8536 A cache failure was detected.
7105 8537 The cache capacities do not match.
7105 8538 An SM failure was detected.
7105 8539 There is insufficient shared memory to
create 4096 pairs.
7105 8540 There is sufficient shared memory to
create 4096 pairs, but initial subsystem
setup is required before creating pairs.
7105 8541 There is sufficient shared memory to
create 4096 pairs, and the initial
subsystem setup is complete.
7105 8542 Failed to complete the initial shared
memory setup.
7105 8543 The shared memory size is different.
7105 8544 16 Mbytes of shared memory is
available.
7105 8545 A power supply failure is detected.
7105 8546 The command was rejected. The PS OFF
is in progress.
7105 8547 A data transfer failure is detected (CHA).
7105 8548 A data transfer failure is detected (DKA).
7105 8549 The S-VOL is not implemented.
Recommended Action
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Stop the usage by the host.
Specify a volume of the supported
emulation type. When the T-VOL is used
as a data volume of Continuous Access
Journal Z, the command cannot be
executed in the current status of
Continuous Access Journal Z pair.
See the section "Sharing Business Copy
Z volumes" in the Business Copy for
Mainframe Systems User Guide for the
relation between the status of Continuous
Access Journal Z pair and the Business
Copy Z operations.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
There is insufficient shared memory in
DKC. Please contact HP Technical
Support.
Please contact HP Technical Support.
Close the message box.
Please contact HP Technical Support.
Please contact HP Technical Support.
Check the contents, and retry.
Please contact HP Technical Support.
Retry the operation with power ON.
Please contact HP Technical Support.
Please contact HP Technical Support.
You cannot execute the operation for the
volume which is not implemented.
Severity
Level
E
E
E
W
W
E
E
E
E
E
E
i
E
E
W
E
W
E
E
W
Part code 7105 243