HP StorageWorks P9000 - Disk Arrays Manual page 94

Table 35 Error codes (part code 03122) (continued)
Part Error
Code Number
03122 106010
03122 10601 1
03122 106012
03122 106013
03122 106014
03122 106015
03122 106016
03122 106017
03122 106018
03122 106019
03122 106021
03122 106022
03122 106023
03122 106024
03122 106025
03122 106026
03122 106027
03122 106028
03122 106029
94 Message (part code group 3nnn)
Error Message
The specified pool subscription limit
value cannot be set.
The number of prefix characters of the
pool name is invalid.
The specified prefix characters for a pool
name contain an invalid character(s).
The initial number of specified pool
name is not input.
The specified initial number of pool
name contains a character other than
the numerical value.
The specified initial number of pool
name exceeds the maximum.
The number of characters that can be set
for the pool name exceeds the maximum,
or some spaces are set.
The specified pool name is already used.
The specified pool ID is incorrect.
The allocation cannot be done from the
specified pool ID.
The selected volumes cannot be specified
as a pool volume, because the volume
types are different.
The selected volumes cannot be specified
as a pool volume, because the cache
modes of the selected volumes coexist.
The selected volumes cannot be specified
as a pool volume, because different
CLPRs selected coexist.
The operation cannot be executed,
because the specified pool is blocked.
The operation cannot be executed,
because the specified pool is blocked.
The operation cannot be executed,
because the pool volume is blocked.
The operation cannot be executed,
because the pool usage exceeds the
threshold.
The operation cannot be executed,
because the specified pool is in shrinking
operation.
The operation cannot be executed,
because the specified pool is in Normal
status.
Recommended Action
Check the specified value of the
subscription limit, then retry the
operation.
Enter prefix characters with a valid
number for the pool name.
Check the prefix characters of pool
name, then retry the operation.
Check the initial number of pool name,
then retry the operation.
Check the initial number of pool name,
then retry the operation.
Check the initial number of pool name,
then retry the operation.
Check the pool name, then retry the
operation.
Specify another pool name, then retry
the operation.
Check the specified pool ID, then retry
the operation.
Specify a pool ID that is smaller than the
one specified before, then retry the
operation.
Select the same volume type, then retry
the operation.
Specify the volumes that have the same
cache mode, then retry the operation.
Specify the volumes that have the same
CLPR, then retry the operation.
Restore the status of the pool, then retry
the operation.
Delete the pool.
Restore the status of the pool volume,
then retry the operation.
Check the usage rate of the pool, then
retry the operation.
Stop the shrinking operation on the pool,
then retry the operation.
Check the status of the pool, then retry
the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W