HP StorageWorks P9000 - Disk Arrays Manual page 287

Table 83 Error codes (part code 9205) (continued)
Part Error Error Message
Code Number
9205 7060 An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
9205 71 1 1 An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
9205 7310 This error code is not registered.
9205 8001 An error occurred while connecting to
the subsystem. Please retry a little later.
9205 8002 A communication time-out error occurred
in the subsystem. Please wait for a while,
and then retry the operation.
9205 8102 This function is not supported.
9205 8120 The specified logical volume does not
exist.
9205 8121 This logical volume is an open volume.
9205 8122 This logical volume is busy.
9205 8126 The logical volume is configured as a
command device.
9205 8136 The command was rejected, because the
licensed capacity was exceeded.
9205 8140 This logical volume cannot be selected
because it is used as a volume for
FlashCopy(R) V2.
9205 8141 This logical volume cannot be selected
because it is used as a reserve volume
for Auto LUN.
9205 8142 You cannot select this logical volume
because it is used as a Continuous
Access Journal Z volume.
9205 56524 This function cannot be used by the
storage partition administrator.
9205 66000 The version number entered in the
spreadsheet is incorrect.
9205 66001 The function name entered in the
spreadsheet is incorrect (The function
name is not VR).
9205 66002 The process mode written in the
spreadsheet cannot be specified.
9205 66003 Two or more spreadsheet declaration
statements and function tags cannot be
entered in the spreadsheet file.
9205 66004 The name of the function tag is invalid
or not entered.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Retry a little later.
Retry a little later.
Check if the DKCMAIN and SVP
microcode versions are mismatched.
Specify a mainframe Volume.
Specify a mainframe Volume.
Retry a little later.
Check the logical volume configuration,
then retry the operation.
The currently licensed capacity is
insufficient. To increase the licensed
capacity, buy a new license key.
Confirm, and operate the volume again.
Check the volume, then retry the
operation.
Check the logical volume, then retry the
operation.
If the problem persists despite retrying,
please contact HP Technical Support.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the content of the Volume
Retention spreadsheet.
Severity
Level
E
E
E
W
W
W
W
W
W
W
W
W
W
W
E
W
W
W
W
W
Part code 9205 287