Table 83 Error codes (part code 9205) (continued)
Part
Error
Code
Number
9205
66005
9205
66006
9205
66007
9205
66008
9205
66009
9205
66010
9205
6601 1
9205
66012
9205
66013
9205
68002
Part code 9210
Table 84 Error codes (part code 9210)
Part
Error
Code
Number
9210
7060
9210
7442
9210
7443
9210
81 12
9210
9107
288 Message (part code group 9nnn)
Error Message
The spreadsheet declaration statement
or the definition statement is not entered
in the spreadsheet file.
The number of data items entered in the
spreadsheet has exceeded the limit.
The number of characters for a row
entered in the spreadsheet has exceeded
the limit.
The number of digits is invalid.
The entered value is outside the setting
range.
The format is invalid.
An unnecessary item is included in the
entered definition.
The same definition exists in the
spreadsheet file. (The combination of a
CU number and an LDEV number is
repeated.)
The access attribute set in the [Attribute]
of the spreadsheet is incorrect (an
attribute other than Read/Write, Read
Only, or Protect is entered).
This logical volume cannot be selected
because it is used as a volume for System
Disk.
Error Message
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
There is an invalid value in the Volume
Retention information.
The VTOC information contains one or
more invalid values.
There is no valid volume.
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Recommended Action
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Enter a correct attribute in the [Attribute]
of the spreadsheet (enter Read/Write,
Read Only, or Protect).
Check the logical volume configuration,
then retry the operation.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Mount volumes, then retry the operation.
To continue processing, click [OK]. To
stop processing, click [Cancel].
Severity
Level
W
W
W
W
W
W
W
W
W
W
Severity
Level
E
W
W
W
W
Need help?
Do you have a question about the StorageWorks P9000 - Disk Arrays and is the answer not in the manual?