HP StorageWorks P9000 - Disk Arrays Manual page 228

Table 59 Error codes (part code 7005) (continued)
Part Error
Code Number
7005 8600
7005 8601
7005 8602
7005 8605
7005 8606
7005 8607
7005 8608
7005 8609
7005 8610
7005 861 1
7005 8612
7005 8613
7005 8614
7005 8615
7005 8618
228 Message (part code group 7nnn)
Error Message
The RAID level of the specified volume
is not supported.
The specified P-VOL cannot be paired
with a backup server volume.
The command has been rejected,
because the specified P-VOL has already
been used as S-VOL of the other pair.
The Pairresync command was issued to
a device in the SMPL status.
The operation to create L2 pair has been
rejected, because the P-VOL of L1 pair
is used as the P-VOL of Continuous
Access Synchronous pair.
The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
pair.
The specified S-VOL is not defined.
The specified volume is not set as a
reserved volume.
The S-VOL is a target volume for Auto
LUN.
The specified volume is an S-VOL.
The specified volume is not an S-VOL.
The RAID level of the specified S-VOL is
not supported.
The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
pair.
The command has been rejected,
because the specified S-VOL is used as
S-VOL of Continuous Access Synchronous
pair.
The S-VOL is already defined as a P-VOL.
Recommended Action
Check the RAID level, and specify a
volume of the supported RAID level, then
retry the operation.
Check the contents, and retry.
The volume used as S-VOL of the other
pair cannot be used as P-VOL.
Check the pair status.
When the P-VOL of L1 pair is used as
the P-VOL of Continuous Access
Synchronous pair, L2 pair cannot be
created.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the Business Copy User
Guide for the relationship between the
state of the Continuous Access
Synchronous pair and the Business Copy
operations.
Refresh the window, and retry the
operation.
Check the contents, and retry.
Release the Auto LUN setting.
Check the volume status.
Check the volume status.
Specify the volume number of the
supported RAID level.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the Business Copy User
Guide for the relationship between the
state of the Continuous Access
Synchronous pair and the Business Copy
operations.
The S-VOL of Continuous Access
Synchronous pair cannot be used as
S-VOL of Business Copy.
Specify another volume.
Check the volume number.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W