HP StorageWorks P9000 - Disk Arrays Manual page 256

Table 63 Error codes (part code 71 10) (continued)
Part Error
Code Number
71 10 91 10
71 10 9377
71 10 9378
71 10 55003
71 10 55004
71 10 55597
71 10 58619
71 10 59000
71 10 59048
71 10 59069
71 10 65662
71 10 65729
71 10 66102
71 10 66560
71 10 69025
256 Message (part code group 7nnn)
Error Message
Do you want to execute the Initialize
operation?
Do you want to enable the setting to
expand the number of relationships?
Do you want to disable the setting to
expand the number of relationships?
The selected T-VOLs include a volume or
volumes that is/are paired.
The number of selected S-VOLs doesn't
match the number of selected T-VOLs.
Correct the number of selected S-VOLs
and T-VOLs.
The entered values are incorrect. Check
the values and then enter correct values.
The operation cannot be executed
because an invalid value is contained in
the obtained information. Refresh the
window and then retry the operation.
The CLPR used for the S-VOL differs from
the CLPR used for the T-VOL. Do you
want to continue this operation?
The S-VOL and the T-VOL belong to
different SLPRs. Do you want to continue
this operation?
The S-VOL and the T-VOL belong to
different SLPRs. If you perform this
operation, the storage partition
administrator will become unable to
operate.
Do you want to continue this operation?
The data has been changed. The settings
will be discarded if you continue the
processing. Do you want to switch the
LDKC?
Pairs cannot be created any more
because SI Operation for FICON(R) Data
Migration is already registered to the
specified volume.
Information was updated by other users.
The list will scroll to the top.
The maximum number of Pairs or
Volumes that can be displayed in the
Preview List is 16,384. Change the
number of pairs or volumes that is
displayed in the Preview List to 16,384
or less.
Some pairs are excluded from the pairs
to be set, because pairs in invalid status
for Split Pair are included in the specified
pairs
Recommended Action
To continue processing, click [OK].
Otherwise, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
Check the selected T-VOLS.
Correct the number of selected S-VOLs
and T-VOLs.
Check the values, then enter correct
values.
Refresh the window, then retry the
operation.
To continue the operation, click [OK].
To continue the operation, click [OK].
Please contact HP Technical Support.
To continue processing, click [OK].
Otherwise, click [Cancel].
Delete SI Operation for FICON(R) Data
Migration that is already registered, or
select another volume.
Click [OK], then continue the operation.
Change the number of the Preview data
to 16,384 or less.
Change the status of the excluded pair.
Severity
Level
W
i
i
W
W
W
W
i
E
E
W
W
W
W
W