HP StorageWorks P9000 - Disk Arrays Manual page 181

Table 53 Error codes (part code 6505) (continued)
Part Error Error Message
Code Number
6505 58298 The specified secondary data volume is
used by Concurrent Copy, Compatible
XRC or another program product.
6505 58302 The specified volume is used as a
command device.
6505 58305 A path is defined to the specified
volume.
6505 58306 The specified secondary data volume is
used as a command device.
6505 58307 The specified secondary data volume is
an On-Demand (Just in Time) volume.
6505 58308 The specified primary data volume is
used as a command device.
6505 58324 The Add Pair (Paircreate) operation
failed because the specified primary
data volume was a P-VOL of Continuous
Access Synchronous or an M-VOL of
Continuous Access Synchronous Z.
6505 58325 The specified primary data volume is
used by Continuous Access Synchronous
or Continuous Access Synchronous Z.
The operation failed because the status
of the Continuous Access Synchronous
pair, or the Continuous Access
Synchronous Z pair was inappropriate.
6505 58326 The Add Pair (Paircreate) operation
failed because the specified primary
data volume was shared by Continuous
Access Synchronous (or Continuous
Access Synchronous Z) and Business
Copy (or Business Copy Z).
6505 58327 The Add Pair (Paircreate) operation
failed because the specified primary
data volume was an LUSE volume.
6505 58328 The operation of Add Pair (Paircreate)
or Resume Pair (Pairresync) cannot be
performed, because the data are
remained in the journal cache for the
restore journal.
Recommended Action
Check whether the specified secondary
data volume is used by Concurrent
Copy, XRC Replication or any of the
following program products:
Business Copy Z
Continuous Access Synchronous Z
Compatible FlashCopy
Auto LUN
Check the configuration of the specified
volume.
Check the configuration of the specified
volume.
Check the configuration of the specified
secondary data volume.
Check the configuration of the specified
secondary data volume.
Check the configuration of the primary
data volume.
Confirm the controller type of the RCU.
Check the status of the specified primary
data volume in the Continuous Access
Synchronous or the Continuous Access
Synchronous Z window.
If the primary data volume is in PSUS,
PSUE or Suspend status, restore the
volume, then retry the operation.
If the primary data volume is in COPY
or Pending status, retry the operation
after the status of the volume changes to
PAIR or Duplex.
Specify another primary data volume,
and retry the operation.
Specify another primary data volume,
and retry the operation.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
E
Part code 6505 181