HP StorageWorks P9000 - Disk Arrays Manual page 160

Table 52 Error codes (part code 6010) (continued)
Part Error
Code Number
6010 9073
6010 9075
6010 9100
6010 9101
6010 9102
6010 9103
6010 9104
6010 9105
6010 9106
6010 9107
6010 91 1 1
6010 91 12
6010 91 13
6010 91 14
6010 91 15
6010 91 16
6010 91 17
6010 91 18
6010 91 19
6010 9120
160 Message (part code group 6nnn)
Error Message
Are you sure you want to suspend the
specified volume pairs?
Are you sure you want to delete the
SSIDs of a specified RCU?
Do you want to exit?
Do you want to cancel?
Do you want to apply?
Do you want to change?
Do you want to change the mode?
The value that is under setup is not
reflected yet. Do you want to exit?
The value that is under setup is not
reflected yet. Do you want to change the
mode?
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Do you want to delete the specified line
of settings from the Preview list?
Do you want to continue this operation?
Are you sure you want to clear SIMs of
Remote Copy?
The value has been changed. Do you
want to continue the operation?
The monitoring was stopped by another
operator. The graph will be closed.
Another operator has changed the
Gathering Interval value. The graph will
be closed.
Are you sure you want to close the
graph?
Please check the specified value.
No graph item has been selected. Please
select a graph item.
The graph will be closed if you execute
the processing. Do you want to execute
the processing?
Recommended Action
To suspend the specified pair, click [OK].
Otherwise, click [Cancel].
To delete the specified SSID, click [OK].
Otherwise, click [Cancel].
To close the window, click [OK].
Otherwise, click [Cancel].
To cancel, click [OK].
Click [OK] to execute the operation.
Not used.
If you want to switch the mode, click
[OK]. If not, click [Cancel].
To close the window, click [OK]. To not
close the window, click [Cancel].
To change the mode, click [OK]. To not
change the mode, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To delete the specified line of settings
from the Preview list, click [OK].
Otherwise, click [Cancel].
To continue the current operation, click
[OK]. Otherwise, click [Cancel].
To clear the remote copy related SIM,
click [OK]. Otherwise, click [Cancel].
To continue the process, click [OK].
Otherwise, click [Cancel].
Click [OK].
Click [OK].
To close the graph, click [OK].
Otherwise, click [Cancel].
To apply this setting, click [OK].
To change the setting, click [Cancel].
Select a graph item.
To execute the processing and close the
graph, click [OK], Otherwise, click
[Cancel].
Severity
Level
i
W
i
i
i
i
i
W
W
W
W
i
W
i
i
i
W
i
W
W