HP StorageWorks P9000 - Disk Arrays Manual page 77

Table 31 Error codes (part code 3005) (continued)
Part Error Error Message
Code Number
3005 2095 A maintenance operation is in progress.
For example:
Therefore the specified operation
cannot be executed.
3005 2200 The Concurrent Copy or the Compatible
XRC operation is in progress in the
target volumes.
3005 2201 Processing cannot be performed
because of Data Retention settings.
3005 2202 The specified volume cannot be
processed due to the effect of the
access attribute assigned by Volume
Retention.
3005 2203 Processing cannot be performed
because of Volume Security for
Mainframe settings.
3005 2204 Devices to be maintained include
journal volumes.
3005 2205 Devices to be maintained include
journal volumes.
3005 251 1 The restore operation has been failed,
because the specified LDEV was not
shredded or formatted.
3005 2512 The restore operation has been failed,
because the system cannot access the
specified LDEV.
3005 2515 One of the following is defined: a
Remote Copy pair, a Continuous
Access Journal pair, or a Continuous
Access Journal Z pair. Alternatively,
command devices defined by Business
Continuity Manager are included.
LDEV formatting is in progress
Correction Copy is in progress
Drive Copy is in progress
The CHA/DKA status is changing
The cache status is changing
Replacement of an OEM drive
microprogram is in progress
LDEV Shredding is in progress
Recommended Action
Wait for a while, and retry.
If the Concurrent Copy or the Compatible
XRC operation is in progress in the target
volumes, cancel the Concurrent Copy
job or delete a Compatible XRC pair via
the host. If the Concurrent Copy or the
Compatible XRC operation is not in
progress in the target volumes, issue the
LISTSESS and LISTDVCS commands,
check the SESSION ID No., and
terminate SESSION by means of the
TERMSESS command.
Check the settings, then retry the
operation.
Check the settings, then retry the
operation.
Check the settings, then retry the
operation.
Delete or suspend all pairs belonging to
journal volumes to be maintained.
Delete all pairs belonging to journal
volumes to be maintained.
Shred or format the specified LDEV. If
the specified LDEV is Thin Provisioning
volume (V-VOL), recover the pool first.
Please contact HP Technical Support.
Release the pair definition or delete
command devices defined by Business
Continuity Manager, and then retry the
operation.
Severity
Level
W
W
W
W
W
W
W
W
E
W
Part code 3005 77