HP StorageWorks P9000 - Disk Arrays Manual page 80

Table 31 Error codes (part code 3005) (continued)
Part Error
Code Number
3005 5551 1
3005 55512
3005 55513
3005 55514
3005 55516
3005 55517
3005 55519
3005 55594
3005 56301
3005 56302
3005 56303
3005 57101
3005 57102
3005 58460
3005 58461
3005 58462
3005 58463
3005 58464
3005 58465
3005 58466
80 Message (part code group 3nnn)
Error Message
The emulation type of the specified
volume is not OPEN-V.
The specified volume is an external
volume.
The specified volume is used as a
V-VOL.
The specified volume is not configured.
This function is not available, because
the program product is not installed.
The specified volume is used as a
Pool-VOL.
The specified pool does not exist.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The logical volume cannot be
registered, because it is not installed.
The specified operation cannot be
done, because the logical volume is
blocked.
The logical volume cannot be
registered, because it is defined as a
Pool-VOL.
The specified logical volume cannot be
registered, because the CLPR number
of the volume does not match the
number of the logical volume already
registered to the Pool.
The specified logical volume cannot be
registered, because it is a V-VOL.
The volume set as a Command Device
cannot be set as a component of a
Pool-VOL.
The specified logical volume cannot be
registered, because a LUN path is set
to the logical volume.
Recommended Action
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Install the program product.
Specify another volume.
Check the setting(s).
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Install the logical volume.
Restore the blockade status of the logical
volume.
Specify another logical volume.
Match the CLPR number of the logical
volumes.
Specify another logical volume.
Specify another logical volume.
Specify another logical volume.
Severity
Level
W
W
W
W
W
W
W
E
E
E
E
E
E
W
W
W
W
W
W
W