HP StorageWorks P9000 - Disk Arrays Manual page 146

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 8855
6005 8860
6005 8861
6005 8862
6005 8863
6005 8864
6005 8865
6005 8866
6005 8867
6005 8877
6005 8881
6005 8883
6005 8884
6005 8885
6005 8886
6005 8887
6005 8888
6005 8889
6005 8890
6005 8891
146 Message (part code group 6nnn)
Error Message
Delete(Pairsplit-S) operation failed
because specified volume or other
volume in the same group is in status
transition.
An internal error occurred.
An internal error occurred.
Please wait a few minutes and retry the
Delete Pair(Pairsplit-S) operation.
Unknown Error Code.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
An internal error occurred.
The specified port is not equipped.
The specified port is being initialized.
Logical paths exist on the MCU port.
Recommended Action
The operation failed, because of one of
the following reasons:
The status of the specified volume or
another volume in the same group is
Deleting.
The status of the specified volume or
another volume in the same group is
Suspending.
Wait for the transition of status to
complete, then retry the operation.
If the transition of status does not occur,
delete the volume by using the "Force"
mode or the "Delete pair by force"
option.
Please contact HP Technical Support.
Please contact HP Technical Support.
The delete pair (Pairsplit-S) operation
failed. A few minutes later, refresh the
window, confirm if the specified volumes
are in the permissible status, then retry
the operation.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Wait for a while, then retry the
operation.
Delete the LUs defined on the specified
port, then retry the operation.
Severity
Level
W
E
E
W
E
E
E
E
E
E
E
E
E
E
E
E
E
W
W
W