Part Code 2010 - HP StorageWorks P9000 - Disk Arrays Manual

Table 29 Error codes (part code 2005) (continued)
Part Error
Code Number
2005 6036
2005 6537
2005 65660
2005 65672
2005 65704
2005 65789
2005 66004
2005 66012
2005 66574
2005 66675
2005 66797

Part code 2010

Table 30 Error codes (part code 2010)
Part Error
Code Number
2010 5030
2010 5032
2010 5033
2010 5050
2010 5051
2010 5054
2010 5055
74 Message (part code group 2nnn)
Error Message
An error occurred during SVP
processing.
There is no error in this setting. However,
there is an error in another setting and
the setting processing has not been
executed.
The Thin Provisioning volume is not
associated with a pool.
Thin Provisioning volume(s) cannot be
combined into LUSE volumes.
The Thin Provisioning volumes are not
associated with the same pool.
The LUSE operation cannot be
performed, because the specified volume
is being used as a quorum disk.
The description of the operation tag is
invalid.
The same definition exists in the
spreadsheet file. (The combination of a
CU number and an LDEV number is
repeated.)
There is a line that cannot be interpreted
as an element of the spreadsheet.
The syntax of parameter is incorrect.
The parameter of lower-level hierarchy
is incorrect.
Error Message
The LUSE volume cannot be released
because the access attribute of the
specified volume is not Read/Write.
There are no LDEVs to set the LUSE top
volume. Check the specified LDEVs.
There are no available LDEVs to make
the LUSE. Check the specified LDEVs.
No LDEV is specified.
You cannot delete the first LDEV of a
LUSE volume.
More than 36 volumes cannot be
combined to form an LUSE.
The size of the LUSE volume exceeds
64,424,505,600 KB.
Recommended Action
If this problem persists, please contact
HP Technical Support.
There is no error in this setting. However,
there is an error in another setting, and
the setting processing has not been
executed.
Associate the Thin Provisioning volume
with a pool, then retry the operation.
Select another volume.
Associate the Thin Provisioning volumes
with the same pool, then retry the
operation.
Check the setting.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Recommended Action
Correct the settings, then retry.
Correct the specified content, and retry.
Correct the specified content, and retry.
Select LDEV and retry.
Check the content of the operation.
Check the content of the operation.
Follow the correct operation procedure.
Severity
Level
E
W
W
W
W
W
W
W
W
W
W
Severity
Level
W
W
W
W
W
W
W