HP StorageWorks P9000 - Disk Arrays Manual page 212

Table 56 Error codes (part code 6610) (continued)
Part Error
Code Number
6610 9008
6610 9009
6610 9021
6610 9024
6610 9025
6610 9026
6610 9100
6610 9101
6610 9102
6610 9104
6610 9105
6610 9106
6610 9107
6610 91 1 1
6610 91 12
6610 91 13
6610 91 15
212 Message (part code group 6nnn)
Error Message
SIMs of Continuous Access Journal and
Continuous Access Journal Z are cleared.
The export is complete.
The Port Setting process has not
completed. Do you want to continue for
other ports?
Are you sure you want to exchange the
specified ports? Please confirm the
associated channel paths are off-line.
Are you sure you want to switch the
ports? If the remote copy paths exist on
the ports, delete them beforehand.
Are you sure you want to switch the
ports?
If any remote copy paths exist on the
ports, delete them beforehand.
Also, to avoid the switching operation
from being reported as a failure, confirm
first that a message prompting you to
change the channel cable connections
is displayed, and then perform the
necessary changes.
Do you want to exit?
Do you want to cancel?
Do you want to apply?
Do you want to change the mode?
The value that is under setup is not
reflected yet. Do you want to exit?
The value that is under setup is not
reflected yet. Do you want to change the
mode?
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Do you want to delete the specified line
of settings from the Preview list?
Do you want to continue this operation?
Are you sure you want to clear SIMs of
Continuous Access Journal and
Continuous Access Journal Z?
The monitoring was stopped by another
operator. The graph will be closed.
Recommended Action
Click [OK].
Click [OK].
To continue processing, click [Yes]. If the
processing finishes, reconfigure the port
that is not in operation.
Ensure that the associated channel paths
are offline.
Remove remote copy paths that are
associated with the ports.
To continue to change ports, click [OK].
To close the window, click [OK].
Otherwise, click [Cancel].
To cancel the operation, click [OK].
To apply settings in the Preview list to
the storage system, click [OK].
To apply settings in the Preview list to
the storage system, click [OK].
To discard the current settings and close
the window, click [OK]. Otherwise, click
[Cancel].
To discard the current settings and switch
to View mode, click [OK]. Otherwise,
click [Cancel].
To discard the current settings and
refresh the window, click [OK].
Otherwise, click [Cancel].
To discard the current settings, click
[OK]. Otherwise, click [Cancel].
To continue the current operation, click
[OK]. Otherwise, click [Cancel].
To clear SIMs, click [Yes]. Otherwise,
click [No].
Click [OK].
Severity
Level
i
i
i
i
i
W
i
i
i
i
W
W
W
W
i
W
i